What you will require to do this walkthrough is
-
A Windows 98 CD
-
A Windows 98 Floppy Boot Disk
-
A Laptop with CD-ROM and floppy access
To start this Windows install. First check that the first boot
device in your system BIOS is set to the Floppy Drive.
( To find out how to access the BIOS please refer to your
motherboard manual or the manufacturer of your computer. (The system bios can
usually be entered on boot, usually by pressing the F1, F2, F8, F10 or DEL key.
Make sure you save the settings before exiting))
If you are unsure or don't want to enter the BIOS then just test
the computer by putting the CD-ROM and floppy disk in their drives and reboot
your laptop.
You will know that your laptop will/has booted of CD-ROM when
the following screen appears.
