Laptop Windows 98 install from CD and Floppy

Microsoft's Windows 98 SE Install step by step

Laptop Floppy and CD Install on Blank Hard Drive

INTRODUCTION

What you will require to do this walkthrough is

A Windows 98 CD

A Windows 98 Setup Boot Floppy Disk Drive

A Laptop with CD-ROM and Floppy Drive access

To start this Windows install. First check that the first boot device in your system BIOS is set to the Floppy Disk Drive.
( To find out how to access the BIOS please refer to your motherboard manual or the manufacturer of your computer. (The system bios can usually be entered on boot, usually by pressing the F1, F2, F8, F10 or DEL key. Make sure you save the settings before exiting))
If you are unsure or don't want to enter the BIOS then just test the computer by putting the Windows floppy boot disk in the drive and rebooting your Laptop
You will know that your Laptop will/has booted when the following screen appears.

Begin Windows 98E Install Step by Step Guide

Click here for Windows 98 OEM installs

Disclaimer

Any named products on this website are copyright © and/or trademarks ™ of their respective companies.

INFORMATION ON THIS WEB SITE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.

Information on this web site may contain technical inaccuracies or typographical errors. Information may be changed or updated without notice. Windows Reinstall or the author will not be responsible for damage or loss of data. You are advised to backup data regularly

Whilst every effort is made to ensure the correctness of the information contained herein, the author can accept no responsibility for damages caused directly or indirectly from the use of such information. By entering this site you are agreeing to this and also to never suing the author.